Olsberg MultiDrive 3 Manual page 9

Main menu "CRANE", proportional functions
The sub-menus in "CRANE" mode are config-
ured when the crane is fitted to the vehicle.
The right and left side displays show symbols
representing the functions controlled by the
corresponding levers.
When the crane menu changes, the symbols and
texts change to match the functions available via the
current menu.
"Crane menu" button
The left-hand button in the top row
on the bar, facing towards the opera-
tor. When the operator pulls out the
start button on the hand controller,
it always starts in menu CRANE 1.
The symbols are stored in a symbol library.
If the library does not contain the required symbol,
a description of the function can be written instead.
Only Arabic numerals and letters from the English
alphabet can be used in the descriptions.
Symbols and texts can be configured via the safety
system.
Press "crane menu" button
Press "crane menu" button
Press "crane menu" button
Technical description 9