Genie TL14 Operating Instruction page 6

• The bulb cannot be replaced.
Delivery
• LED desk lamp
• USB charging cable
• Operating manual
Technical specifications
See page 21
Initial commissioning / Charging
• Compare product and USB power source specifications as they must be identical.
• Use only the supplied USB charging cable.
• Before initial operation, the battery must be fully charged. Depending on the USB power source
used, this can take up to 6 hours.
1. Insert the 3.5 mm jack plug of the supplied charging cable into the 3.5 mm jack socket of the
LED desk lamp.
2. Connect the USB 2.0 port of the charging cable to a USB power source. This can either be a
220/230 V USB charging adapter or the USB port of a PC.
3. The red indicator lights up during charging and goes off when the battery is fully charged.
4. When the battery is charged, disconnect the charging cable from the LED desk lamp and from
the USB power source.
5. The lamp should be recharged at the latest when it starts to dim, or it cannot be turned on.
Using the clip
• Clamp only to a mounting surface that withstands the weight of the luminaire and has a
thickness of 10-35 mm.
Attention: There may be visible pressure points when the product is dismantled.
• Do not hold any limbs between the clips as they may be squashed.
• The lamp must be installed in such a way that no persons can be injured by falling, stumbling or
the like.
1. Clamp the LED desk lamp with the clip to the edge of the table.
2. Align the arm accordingly.
Use with stand
• Place the lamp on a level and non-slip surface.
• The lamp must be installed in such a way that no persons can be injured by falling, stumbling or
the like.
Switch on / off and brightness
Switching on and off and adjusting the brightness is done via the touch panel.
Touch the sensor touch area briefly to turn the light on / off.
Touch and hold the sensor touch area to adjust the brightness in ascending or descending
regulation.
HANDLING THE GUARANTEE
Thank you very much for purchasing this GENIE product. Please note the following advice
whenever this machine does not function faultlessly, contrary to expectations.
6