Related Manuals for Waylens Secure 4K
Summary of Contents for Waylens Secure 4K
- Page 1 Connect your Secure 4K using this WiFi SSID and password, making sure to keep them in a safe place for future reference. © 2020 Waylens, Inc. All rights reserved.
- Page 3 What’s included with the Secure4K Tamper Installation Tape Guide Secure4K Camera & Dock Power Cord Secure4K Placement Mount Plate Guide Option A & Adhesive OBD-II Power Cord DMS Module Power Cord (Optional) Locker Option B Direct Wire Power Cord Please ensure the Secure4K and any necessary power components are secured and out of reach of passengers, especially young children and pets.
- Page 4 Secure4K Overview Using the Waylens Fleet App The Waylens Fleet App is the primary interface for the Secure4K, providing the fleet an easy way to install and maintain Camera Mount Screw Status LED mode the camera. Solid Green Power On...
- Page 5 OBD-II Power Cord identifying fuses in a vehicle and installing power system related items. b. Please contact support@waylens.com for assistance with finding an approved dealer in your area if you are unsure of where to locate one yourself. 3. Connect the red ACC wire to a switched fuse: a.
- Page 6 Waylens Fleet App has the diagnostic feature to ensure the power cord connection is right. 1. Open the Waylens Fleet App and follow the prompts to connect to the Secure4K camera. 2. If can’t find the Secure4K WiFi network, normally is a network with name as Waylens-xxxxx (DIRECT-Waylens-xxxxx if WiFi Direct is enabled), press Waylens Button to wake up the WiFi.
- Page 7 4. Install the Mount Plate on the Windshield 5. Attach the Camera and Dock to the Mount Plate SAFETY WARNING: Do not place the Secure4K in an area on the windshield where the product interferes with the driver’s field of vision or other in-vehicle sensors. The Secure4K should be mounted at the center top of the front windshield, optimizing visibility inside and outside the 1.
- Page 8 DMS camera calibration process is to calibrate the DMS camera so that the DMS camera can detect the driver's face and sight line so that the DMS camera can better detect and upload DMS events. To calibrate the DMS camera, Waylens Fleet App should be used. 1. Use a coin to loosen the Dock hinge by turning the adjustment slot 1.
- Page 9 Mount Screw, make the Remote Camera Cable Socket appear. Waylens recommends using a high endurance microSD card (class 10 or higher MLC microSD card Insert the DMS cable plug into the Socket, ensure 32-256GB) designed for continuous recording situations. While other cards will work with the the direction is right.
- Page 10 Removing the Secure4K Secure4K SIM Card 1. Stop the Secure4K if it’s recording by pressing the Waylens Button on the Dock or turning Secure4K has pre-installed SIM card. Please do not remove the pre-installed SIM card. monitoring off by fleet managers via API.
- Page 11 This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not operate in conjunction with any other antenna or transmitter. waylens.com support@waylens.com Making Intelligent Video Security Easy for Fleets...