Related Manuals for Airborne Athletics Finisher FlipSled FS300
Summary of Contents for Airborne Athletics Finisher FlipSled FS300
- Page 1 FlipSled™ Training Sled by The Finisher™ Owner’s Manual FlipSled™ FS300 FlipSled™ FS200 FlipSled™ FS100 www.TheFinisher.com...
-
Page 2: Specifications
SPECIFICATIONS Product Specifications Product Dimensions FS300 ........67.2in x 30in x 24in (LxWxH) 170.7cm x 76.2cm x 61cm (LxWxH) FS200 ........... 67.2in x 30in x 24in (LxWxH) 170.7cm x 76.2cm x 61cm (LxWxH) FS100 ........61.2in x 30in x 24in (LxWxH) 155.5cm x 76.2cm x 61cm (LxWxH) Product Weight, Unloaded FS300 ........ -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read all instructions before using the training sled. 2. This is not a toy and is intended for use by or under the supervision of adults. 3. Only use the attachments recommended or sold by the manufacturer. 4. -
Page 4: Table Of Contents
TABLE OF CONTENTS Specifications ......................2 Important Safety Instructions .................. 3 Table of Contents ....................4 General Information ....................5 Body Components ....................6 Body Assembly ......................7-10 Attachment Components ..................11 Attachment Assembly ....................12-13 Maintenance and Warranty ..................14 Maintenance Schedule Cleaning Registration... -
Page 5: General Information
Use the product only as described in this manual. Airborne Athletics assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 6: Body Components
BODY COMPONENTS Main Frame x 1 You will receive one of the following frames depending on the model you ordered. End Frame with Bumpers x 4 FS300 Frame FS200 Frame 3/8” Washer x 20 3/8” Nut x 10 FS100 Frame 9/16”... -
Page 7: Body Assembly
BODY ASSEMBLY Assembly instructions use FS300 frame. All frames have the same assembly process. Helpful Notes Assembly may be easier if you have a socket ratchet handle and 9/16” socket. Assembly may be easier if two adults work together to align parts. - Page 8 BODY ASSEMBLY 2. Main Frame Set the main frame on top of the bottom end frames. Closely line up the holes. 3. Top End Frames Set 2 end frames on top of the main frame. Closely line up the holes. www.TheFlipSled.com FlipSled™...
- Page 9 BODY ASSEMBLY 5. Bolt Outer 4 Bolts Short Bolt x 4 With 4 short bolts, 8 washers, and 4 Washer x 4 nuts, fasten the end frames to the main frame along the outer edge. HAND TIGHTEN. Washer x 4 Nut x 4 4.
- Page 10 BODY ASSEMBLY 6. Bolt Inner 4 Bolts Short Bolt x 4 With 4 short bolts, 8 washers, and 4 nuts, fasten the end frames to the Washer x 4 main frame in the inside on both ends. HAND TIGHTEN. Washer x 4 Nut x 4 7.
-
Page 11: Attachment Components
ATTACHMENT COMPONENTS Sled Receiver Frame x 2 3/8” x 1” Bolt x 8 Handle x 4 3/8” Washer x 8 3/8” Split Washer x 8 Ski x 4 9/16 Wrench x 1 *NEVER DROP OR FLIP ONTO SKIS* www.TheFlipSled.com FlipSled™ Rev G... -
Page 12: Attachment Assembly
ATTACHMENT ASSEMBLY Assembly instructions use FS300 frame. All frames have the same assembly process. Helpful Notes Assembly may be easier if you have a socket ratchet handle and 9/16” socket. Assembly may be easier if two adults work together to align parts. - Page 13 ATTACHMENT ASSEMBLY 3. Bolt Together Loosely screw in the bolts, lock washers, and washers to attach the sled receiver. When all 4 bolts have been installed on one side, tighten all bolts. Repeat for other side. Bolt x 4 Lock Washer x 4 Washer x 4 4.
-
Page 14: Maintenance And Warranty
Warranty Who does this warranty cover? This limited warranty (the “Warranty”) is issued by Airborne Athletics, Inc. (“Airborne Athletics”, “we”, or “us”) to you, a purchaser who purchased a new or factory refurbished FlipSled ™ or new FlipSled ™ branded accessories directly from us. The Warranty covers only you, the original product purchaser. - Page 15 MAINTENANCE AND WARRANTY Warranty Continued What is not covered by this warranty? Regardless of the above, the Warranty does not cover the following: Normal wear and tear. Defects or malfunctions experienced during or caused by use not in conformity with Product documentation and technical specifications.
- Page 16 If your Product has a defect or malfunction covered by this Warranty, Airborne Athletics will repair, replace, or refund the Product at the sole discretion of Airborne Athletics. If Airborne Athletics determines that a Product should be replaced, the replacement may be a new or a re-manufactured Product.
- Page 17 AIRBORNE ATHLETICS AND ANY THIRD-PARTY SERVICE PROVIDERS OR SUPPLIERS SHALL NOT BE LIABLE FOR PERFORMANCE DEFICIENCIES CAUSED OR CREATED BY YOU OR OTHERS YOU ALLOW TO USE THE PRODUCT. AIRBORNE ATHLETICS DOES NOT WARRANT THAT ITS EQUIPMENT’S PERFORMANCE WILL BE UNINTERRUPTED, ERROR-FREE OR COMPLETELY SECURE.
- Page 18 AIRBORNE ATHLETICS SHALL NOT BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, INDIRECT, OR PUNITIVE DAMAGES OF ANY KIND WHATSOEVER, EVEN IF AIRBORNE ATHLETICS HAS BEEN ADVISED AS TO THE POSSIBILITY OF SUCH DAMAGES, FOR ANY CLAIM ARISING FROM OR RELATED TO THIS WARRANTY STATEMENT, REGARDLESS OF...
-
Page 19: Contact Information
CONTACT INFORMATION Be Better Everyday™ Online: www.theflipsled.com Fax: 952-873-2687 Phone: 888-507-4668 Email: info@theflipsled.com Mail: 1701 W 94th St, Suite 225 Bloomington, MN 55431 Follow us on Facebook, Instagram, Twitter, & YouTube www.TheFlipSled.com FlipSled™ Rev G...
Need help?
Do you have a question about the Finisher FlipSled FS300 and is the answer not in the manual?
Questions and answers