Advertisement
Removal of Filters
Don't touch this plasma filter within 10 seconds after opening the inlet grille, it may cause an electric shock.
1. Deluxe (Type 1):
Open the upside of the panel and lift it up as shown. The hooks of the panel will come off. Remove the
air filters. Then pull out the plasma filter
Front panel
After cleaning and drying well reinstall the filters in their original position.
2. Deluxe (Type 2):
Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.
Front panel
How to use the front panel
1. Front panel closing
Move the link upward and close the front panel.
3. Standard Split Type : Two different methods to open the front panel based on types of air
Type 1: Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and 3M multi protection filter by slightly pulling
forward.
Panel hook
conditioner as below ;
Maintenance and Service
2. Front panel removing
Raise the link up to hook hanger and remove
front panel forward.
3M multi
protection filter
Plasma filter
(optional)
Plasma filter
Plasma filter
Advertisement
