LG WT17DSBP Service Manual page 29

Tub cover
Inner tub
Leads
3) Disassembly of Lid Assembly, Top
4) Disassembly of Back Cover, Drain Pump,
Drain hose-p
5) Replacement of Damper asm
29
Cover, Tub Cover, Pulsator & Inner Tub
Remove Q-spring & two hinge pins then
disassemble the lid assembly
then disassemble the top cover.
the tub cover.
disassemble the pulsator.
Disassemble the inner tub.
Clutch(Transmission) & Motor
the back cover.
Disconnect the leads and the drain hose-p from the
drain pump.
disassemble the drain pump.
Fall down the washer for clutch & motor removal.
Remove the belt.
Disassemble the clutch.
disassemble the motor.
Separate top cover from washing machine.
case with out tub.
Damper assembly shall not be disassembled.
Replace damper as assembly.
For assembly, keep the following.(Location & color)
Location P/No.
K101
K102
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only training and service purposes.
PIVOT(Color)
NATURAL
BLUE