Advertisement
Quick Links
NetTool
Series II Inline Network Tester
™
Helpful Hints
Starting Up:
• Plug NetTool Series II into a wall plate or inline between
two devices like a switch and a PC, IP Phone or
Access Point, with the network on the left RJ-45.
• Press the green Power button firmly for one second to
turn NetTool on. You will see the following screen:
AutoTest:
• Press Select to begin the AutoTest.
• NetTool listens to the network traffic and displays
information about PC and link configuration,
network health, key devices,
problems, and more.
Switch
Icon
Actual value underlined
Link speed
Link level
and polarity
Receive Pair
Cable status
At-a-Glance Guide
NetTool Icon
PC
Icon
Main Menu
Duplex Settings
(half or full)
Transmit Pair
N E T W O R K
Buttons and Indicators:
Link State
LED
PoE
LED
Navigation
Keys
Navigation Keys:
• The Navigation Keys allow you to access all of the
NetTool functions.
• Press the Navigation Keys to scroll to any menu item
(including the NetTool, Switch and PC icons) and
press Select.
Tip: You can exit out of many screens by scrolling
to the and pressing Select.
NetTool Series II Setup:
• Press up arrow key to highlight the NetTool icon.
• Press Select to access NetTool setup.
• Use the Navigation Keys to view and change any of the
Settings preferences.
Vision into network devices and
application connectivity
S U P E R
V I S I O N
Collision
and Error LED
Utilization
LED
Charge
LED
Select
Power
Advertisement
Related Manuals for Fluke NetTool II Series
Summary of Contents for Fluke NetTool II Series
- Page 1 N E T W O R K S U P E R V I S I O N NetTool Series II Inline Network Tester ™ Helpful Hints Buttons and Indicators: Starting Up: • Plug NetTool Series II into a wall plate or inline between Collision two devices like a switch and a PC, IP Phone or and Error LED Access Point, with the network on the left RJ-45. Link State • Press the green Power button firmly for one second to turn NetTool on. You will see the following screen: PoE...
- Page 2 Active Networking Testing Icons Select the Network Icon Select the PC Icon Select Menu Items For Select Menu Items For Vision Into the Network Vision Into the Device Select the NetTool Icon Select Menu Items To Configure NetTool Select Protocol Select Protocol Select Tool Icon Select Tool Icon...
- Page 3 N E T W O R K S U P E R V I S I O N Active Network Testing Menu Select Toolkit Select NetProve If Single-Ended Select Key Devices Select Health Select Ping Select Catalog Select Device Type If Single-Ended Change Direction, Select Device Select Applications Units, Or Metric Select Device Select Problems Select Menu Item Add Device Select Protocols Select Tool Icon Select Protocol Save Report Overwrite Report...
- Page 4 Select IP Setup Select Cable Toner Select About NetTool Start Toner N E T W O R K S U P E R V I S I O N Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact. © 2006 Fluke Corporation. All rights reserved. Printed in U.S.A. 10/2006 1590436 D-ENG-N Rev D Vision into network devices and application connectivity...