Before Operation; Setting The Clock; Microwave Cooking - Sharp KM-2002B Operation Manual

BEFORE OPERATION

Plug in the oven. The oven display will display: „0:00", an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set
the clock, see below.

SETTING THE CLOCK

When the microwave oven is turned on the clock set up will appear on the display „0:00",
buzzer will ring once. The microwave oven will enter to waiting state.
1) Press " " twice, the hour figures will flash;
2) Press " " or "
3) Press " " to confirm, the minute figures will flash.
4) Turn " " or " " to adjust the minute figures, the input time should be within 0--59.
5) Press " " to finish clock setting.
":" will flash. The current time will display.
Note: If the clock is not set, it would not work when powered.

MICROWAVE COOKING

1) Press the " " key once, and "P100" will display.
2) Press " " repeatedly or press "
"P100", "P80", "P50", "P30", "P10" will display in order.
3) Press " " to confirm setting.
4) Press " " or "
5) Press " " to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 MIN :
1---5 MIN :
5---10 min :
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Microwave Power
Display
00_KM-2502B_2002B_OM_WEST_PL.indb 17
" to adjust the hour figures, the input time should be within 0--23.
" or "
" to adjust the cooking time. (The maximum cooking time is 95 minutes)
5 seconds
10 seconds
30 seconds
High Med.High
P100 P80
GB-17
" to select the microwave power.
Med. Med.Low
P50 P30
Low
P10
2017-08-30 11:26:17