Advertisement
AIR AND HYDRO JET
Here is a Troubleshooting Guide and instruction manual which should resolve all E12 and E13 error
codes experienced with all
E12 ERROR CODE
WATER LEAKAGE
REASON,
WATER LEAKAGE
This error code is visible if there is an issue with water leaking within the body of the pump.
WATER LEAKAGE
SOLUTIONS
WATER LEAKAGE – HOW TO RESOLVE THIS
Check the couplings on the pump connections to ensure there is no water leaking from these.
Also ensure the washers within these are flat.
These can be checked using a screwdriver and simply unscrewing the coupling.
If these are dry and tight, please contact Bestway Aftersales as there may be a leak within the
pump.
Please do not attempt to reset or use the pump whilst the E12 error code is visible.
E13 ERROR CODE
SIGNAL ISSUE
REASON,
SIGNAL WITHIN THE PUMP
This error code is visible if there is an issue with the signal sensors in the pump body itself.
The electric signal within the pump body between the control panel and power board has
become disconnected.
SIGNAL ISSUE
SOLUTIONS
SIGNAL IN THE PUMP – HOW TO RESOLVE THIS
This error code can become visible on 2017 model pumps and newer.
The date of the spa pump can be located on the silver sticker on the pump body itself (S/N
Number) or engraved within the handles.
If this error code does become visible, please contact your Bestway Warranty Department as the
pump will need to be either replaced or repaired.
As this is an issue with the signal between two components within the body, please do not
attempt to repair or open the pump.
E12 & E13
All
AirJet™
Spa's· All
Troubleshooting Guide for all models 2018 & older
AirJet™
and
HydroJet™
Spas.
HydroJet™
Spa's
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lay-Z-Spa AirJet
Summary of Contents for Lay-Z-Spa AirJet
- Page 1 AIR AND HYDRO JET E12 & E13 AirJet™ Spa’s· All HydroJet™ Spa’s Troubleshooting Guide for all models 2018 & older Here is a Troubleshooting Guide and instruction manual which should resolve all E12 and E13 error codes experienced with all AirJet™...
- Page 2 FURTHER INFORMATION Please do not open the pump and fix any Ensure the pump does not get completely internal parts wet as this is not waterproof If the pump is opened or tempered with, this Always protect the pump and power supply will void any warranty from wet or cold conditions FURTHER STEPS AND CONTACT NUMBERS...
Need help?
Do you have a question about the AirJet and is the answer not in the manual?
Questions and answers
is there a way to put more air into the wall while pool contains water