Assembly - Ninja Coffee Bar CF090C Series Owner's Manual

Assembly

Fig. 5
Fig. 8
1 Place the brewer on a dry, clean, and level surface.
2
To easily fill the water reservoir, use the hand grips
to lift the reservoir to the right and up off the brewer.
(Fig. 5) The water reservoir lid flips open for easy
filling, and the entire lid is easily removable for quick
cleaning. Add fresh, filtered water at or above the
minimum fill line for your desired beverage size (Fig. 6),
then return the water reservoir to the brewer by angling
the reservoir into the holder and pushing in towards
the brewer to lock into place. (Fig. 7) Do not fill water
reservoir with any other liquids such as brewed coffee,
carbonated beverages, etc. as other liquids may
damage your brewer.
9
1-877-646-5288
Fig. 6
Fig. 9
3 Slide brew basket out (Fig. 8) and lift both the
permanent filter and Filter Carrier Insert from the
brew basket to remove. (Fig. 9) To reinsert, set the
permanent filter and Filter Carrier Insert back into the
brew basket. (Fig. 10) When cleaning, you can remove
the permanent filter from the brew basket.
4 Once the filter is in place, slide the brew basket all the
way in until you hear a slight click.
Fig. 7
Fig. 10