Rear Panel; Remote Control - Marantz professional PMD-100CD User Manual

Rear Panel

1. Outputs (unbalanced RCA): These outputs send the audio signals from a CD, USB device (mass storage class),
and device connected to the Aux In. Use RCA cables to connect these outputs to external speakers, sound
system, etc. See Setup
2. Outputs (balanced XLR): These outputs send the audio signals from a CD, USB device (mass storage class),
and device connected to the Aux In. Use XLR cables to connect these outputs to external speakers, sound
system, etc. See Setup
3. AC In: Use the included power cable to connect this input to a power outlet. See
4. USB Port: This USB port is used to upgrade the unit's firmware. The "Update/Normal" switch is used to set the
mode for the USB connection for the firmware upgrade. If updating the unit, set this switch to the "Update"
position. For normal operation, this switch should be left in the "Normal" position.

Remote Control

1. Mute: Disables the sound from the audio outputs.
2. USB: Switch to USB Mode.
3. AUX: Switch to Aux Mode.
4. CD: Switch to CD Mode.
5. Play: Plays audio from a CD or USB flash drive.
6. Pause: Pause audio from a CD or USB flash drive.
7. Stop: Stops audio from a CD or USB flash drive.
8. Eject: Ejects or inserts a CD.
9. Search Backward: Hold to rewind through a CD or USB track.
10. Search Forward: Hold to fast forward through a CD or USB track.
11. Skip Back: Press to skip to the previous track or chapter.
12. Skip Forward: Press to skip to the next track or chapter.
13. Random: Press to cycle through Random FLD/Random Play Mode
Mode () in CD or USB mode.
14. Display: Press and release the button to adjust the display brightness. Press and
hold the button to open the options menu. Hold the button again to close the option
menu.
15. Repeat: In CD or USB mode, switch between Repeat Playback modes: Repeat One
, Repeat All , and Repeat Off.
16. Time: In CD or USB Mode, press this button to switch the time in the display from
Time Elapsed, Time Remaining, Total Elapsed Time, or Total Time Remaining (for CD
Mode only).
17. Text/Lock: In CD or USB Mode, press to switch the display between the track name
and artist name. Press and hold to turn Panel Lock on and off.
6
2
1
for more information.
for more information.
4
or Single Play
3
Setup for more information.