Placing Film / Slide In The Holder; Connecting The Photomaker - Kaiser Baas PhotoMaker User Manual

PLACING FILM / SLIDE INTO THE HOLDER
1. Place the negative film or slide holder in front of you with the Kaiser Baas logo
facing upward.
Open the negative film / slide holder as illustrated below.
2. Place your negative film strip / slides into holder as shown.
3. Close the holder and make sure it clips closed properly.
10

CONNECTING THE PHOTOMAKER

1. Plug the USB cable of the PhotoMaker into an available USB 2.0 port your
computer. Once connected, the power LED light on the PhotoMaker will illuminate.
2. Insert the loaded negative film / slide holder properly into the slot according
to the triangular signs as shown.
IMPORTANT: INSERTING HOLDERS INCORRECTLY
MAY DAMAGE YOUR PHOTOMAKER
Insert holder through the front
entrance of the PhotoMaker.
1 1
11