Advertisement
BASS GUITAR AMPS
1
2
3
4
5
6
7
B100C BACK PANEL
1. Ground Lift: Lifts the ground from the XLR direct output. Useful for eliminating hum when the direct out is used
2. Direct Output: XLR direct balanced output connector jack. Use to connect to a larger PA or Mixing Console
3. Direct Output Level: Adjusts the level of the direct output signal
4. Pre/Post EQ Switch: Switches Direct Output between pre and post EQ operation
5. Effects Send: ¼" two-conductor jack sends signal to an external effects or signal processing device
6. Footswitch Input: Use any on/off footswitch that terminates in a TS or TRS ¼" connector. We recommend the Livewire Solutions
LWS21 or something similar
7. Effects Return: ¼" two-conductor jack returns signal from an external effects or signal processing device
8
www.acousticamplification.com
Advertisement
