Advertisement
BASS GUITAR AMPS
1
2
B50C FRONT PANEL
1. Bass Input: ¼" two-conductor jack
2. Volume: Adjusts the overall volume level of the amplifier
3. Overdrive: Controls the amount of overdrive
4. On/Off Switch: Activates the overdrive circuit
5. Overdrive Level: Controls the mix of overdrive vs clean signal
6. Shape: This button decreases the level of select mid frequencies instantly creating an alternate EQ curve
7. Low: This control increases or decreases bass frequencies, centered at 60Hz
8. Low Mid: This control increases or decreases low midrange frequencies, centered at 400Hz
9. High Mid: This control increases or decreases high midrange frequencies, centered at 1.5kHz
10. High: This control increases or decreases treble frequencies, centered at 5kHz
11. Aux In: This 3-conductor
can practice along. To control the volume of the source, adjust the output volume of the device.
Note: Turn the volume all the way down before plugging in your device and adjust the volume according to your taste.
12. Headphone Output:
13. Power Switch: When lit, the amplifier is on and ready for use.
6
www.acousticamplification.com
3
4
5
6
" media input jack will allow you to plug in a smartphone, CD player, or any other source so you
1 / 8
" 3-conductor jack for plugging in headphones. When used, it will disconnect the internal speaker
1 / 8
7
8
9
10
11
12
13
Advertisement
