Setting Up Internet Access Manually - Devolo MicroLink ADSL Modem User Manual

3.2

Setting up Internet access manually

You will also have the option of setting up the router manually if you cannot
use the setup wizard—if you are not using Windows as your operating sys-
tem, for example.
The computer you are using to configure the MicroLink ADSL Modem
Router must be set up to receive DHCP information automatically. For further
information, please see the documentation of your operating system.
The sample provider list illustrated here is for Germany. Further provider lists
are available with providers relevant to other countries.
The wizard will now install the selected devolo software on your com-
puter. When the installation is complete, the router configuration wizard
will automatically start. Initially, it will check your computer's DHCP set-
tings and adjust them as necessary. Once this is complete, it will assist
you in setting up Internet access for the router.
Finally, the wizard will contact the devolo website to ensure that Internet
access is working. If the Internet connection is working correctly, config-
ure all other connected computers. Insert the devolo product CD in the
computers to be configured and install 'MicroLink ADSL Modem Router
Installation' as a minimum. The wizard will then check the settings of the
operating system and correct them as necessary, and will skip setting up
Internet access if so requested.
Open your browser and enter the URL 'http://192.168.0.253'.
Enter the default username and password 'admin' and 'password'.
If you have not yet configured Internet access, a list will now be displayed
of the countries in which you can operate the MicroLink ADSL Modem
Router. Select your location from the country list and click Next >>.
|
Router configuration
|
devolo MicroLink ADSL Modem Router
13
|