Before The First Use; Cleaning And Maintenance - HOME ELEMENT HE-HP700 User Manual


Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
 For indoor use only.

Do not operate any product with damage.

Keep the power cord away from sharp edges and hot surfaces.
 Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.

Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.

Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.

Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
 To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.

Do not use near explosives and flammable materials.

Do not move the appliance until it is completely cool.

Do not touch the metal parts of the device, because they get very hot during operation.
 Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.

Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.

BEFORE THE FIRST USE


Remove all packing material from the appliance.
Before using your Hot plate for the first time, turn the Hot plate on the highest position 3 for 5-10 minutes to condition the protective coating. This should be the only time the hot plate
is turned on without a cooking utensil on it. Some parts of the cooking plate have been slightly greased and as a result the unit may slightly smoke when switched on for the first time.
After a short time this will cease.
INSTRUCTION FOR USE

Place the appliance on a flat, stable surface, able to hold its weight with the food to be cooked on it.
 Turn the temperature control switch to "0" (OFF).

Plug in the appliance.

Turning the temperature switch, choose the necessary heating mode: from1 (slow heating) to 3 (the highest temperature available).
 The LED light will go off when the burner reaches the selected temperature and will cycle on and off to maintain the temperature.

Cooking pots and pans should have flat bottom, their dimensions should be identical with those of the burner.

Switch the unit off or to a lower heating mode in good time in order to save energy. The burner will still emit intensive heat for a few minutes, which can be used to complete the cooking process.

The cooking plate is equipped with a thermostat which prevents overheating. Nevertheless, you should always switch off the unit after cooking: turn the temperature control switch to the "0" position
and unplug the appliance.

CLEANING AND MAINTENANCE


Unplug the appliance from the power supply before cleaning.

Let the unit cool down completely.
5