Blaupunkt 5WK600FF0R Instruction Manual page 42

Built-in wine cabinet
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 26
Shelves
To prevent damage to the door seal, ensure that the door is fully open before pulling out the shelves to add or remove
bottles.
For easier access to the contents of the shelves, slide the shelf out approximately one third of the way. The shelves are,
however, fitted with a stop to prevent the bottles falling out.
To remove or reposition the shelves, move the shelf to the position where the notch of wooden shelf is exactly under the
plastic post and lift the wooden shelf. Please ensure these are replaced when the shelf is put back.
7. LOADING
The maximum recommended loading quantities for bottles are given as guidelines and are indicative only; they provide a
quick estimate of the size of the appliance (similar to the capacity of a refrigerator expressed in liters).
They correspond to tests conducted with a standard bottle: the standard "75 cl light Bordeaux" bottle -standards apply the
geographical origin of each bottle shape (Bordeaux, Burgundy, Provence, etc.) and a type (traditional, heavy, light, flute, etc.),
each with its own diameter and height.
In reality and in extreme cases, you could store more bottles by stacking the same type of bottle without using shelves, but a
varied cellar comprises a wide variety of bottles and the practical aspect of everyday cellar management limits its capacity.
You will therefore probably load the appliance a little less than the recommended maximum.
-
Verify that you can shut the door without touching a bottle before closing.
-
When loading several bottles at once, it will take more time for the unit to reach the desired temperature.

Advertisement

Table of Contents
loading

Table of Contents