Blaupunkt 5WK600FF0R Instruction Manual page 38

A. Install your wine cellar into the kitchen cabinet, having first checked that the dimensions correspond exactly to those
indicated on the installation drawing.
B. Once your wine cellar properly positioned into the kitchen cabinet, please adjust it as close as possible to the edges of
the kitchen cabinet. Make sure that your appliance is flushed with the kitchen cabinet in order to ensure a
functional push-pull opening system.
C. Once black mounting bars are installed as close as possible to the edges of the kitchen cabinet, test the push-pull system
to open and close the door. Once the test is successful, please screw the upper fixing bar and the lower one (2 screws at
the top / 2 screws at the bottom) in order to correctly install your wine cellar.
Improper installation of your appliance will not allow the push-pull system to function properly to open or
close the door. Make sure to follow the instructions above.
Opening and closing push-pull system
Put your hand to the opening zone and wait for a few seconds before the opening system can trigger. This is normal that
there is a delay between putting your hand to the upper left zone of your wine cellar and the moment the door opens.
Moreover, the system is electronic; it does not require any adjustment on your side.
Before closing the door carefully,
position
. Forcing when closing
please wait for the opening system to return to its original
may damage
the push-pull system.