Aoss Setup - Buffalo AirStation WBR2-G54 User Manual

AOSS (AirStation One-Touch Secure System) is a simple, one-touch setup for connecting wireless
clients to an access point while setting up the most secure possible connection. Users no longer
need to worry about choosing the proper security protocols, IP addresses, or ESS-ID's. The
intelligence of AOSS determines the most optimal connection and configures itself in seconds.
■ NOTE: AOSS automatically creates a secure connection between your AOSS Access Point and
client. You must have a Buffalo AOSS enabled wireless client device to use the AOSS features of
your AOSS Access Point/Router.
Configure your WBR2-G54's internet con-
◗
nection by referring to the instructions in
the WBR2-G54's Quick Setup Guide.
Once the WBR2-G54 has been config-
◗
ured, follow the directions to install your
wireless client device and its drivers if
necessary. Certain wireless client adapt-
ers require client software to configure
them. If your device has a Client Man-
ager, then install it as well.
■ NOTE: If the wireless client adapter is
installed on a PC, then the AOSS client
manager will need to be installed as well. If your wireless client adapter is a standalone device that
does not require a PC, then just power up the device.
Standalone Devices: Ethernet Converters and Access Point Bridges
Client Manager Devices: CardBus, USB, and PCI Adapters.
Standalone Client Manager
AOSS Device
24
AOSS
Client Manager
Device Software