Mains Voltage - REBER 9512 N User's Reference: Use And Maintenance – Original Instructions

User's Reference: Use and Maintenance – Original instructions
GB
Read all instructions and save for future reference
Notice d'utilisation et Entretien - Instructions d'origine
F
Lire attentivement la notice avant l'utilisation et garder la notice
PRESENTATION

The aim of this handbook is to provide the costumer with as much information as possible about the item and with the instructions for its
use and maintenance in order to keep it working efficiently and to preserve performances.

This handbook should be given to people in charge for the use and periodical maintenance of the item

The handbook should be kept in good conditions and stored in an easily accessible place for rapid reference.

Reber is in a continues development of its products to improve technical, safety, ecological and commercial features; products could be
different from this data sheet due to this non stop evolution.

V. 07.2017
Reber srl–Via Valbrina 11– 42045 Luzzara (RE) Italia–www.rebersrl.it–E.mail: info@rebersrl.it
Service / Spare Parts: www.rebersrl.it
The characteristics – photos – drawings are indicative and the manufacturer can modify them without any notice
RESPONSABILITY OF THE SUPPLIER
The supplier will be not responsible for any damage to people or material other than the described machines.
The supplier does not guarantee the conformity of the machine to the rules in force in the extra UE countries where the machines could be installed
and particularly regarding accident prevention.
It is at purchasers charge to put machines in conformity to the above mentioned rules, and he assumes all relative responsibility releasing the supplier
from all responsibility.

MAINS VOLTAGE

Before plugging in, check that the mains voltage corresponds to the voltage indicated on the technical data sticker of the machine. Pls. check the notes
and instructions concerning electrical connection.
WARNINGS: CAUTIONS TO BE TAKEN AND SAFETY RULES
When using electrical appliances, basic safety precautions should always be followed
including the following:
- Read all instructions.
- Do not operate any appliance with a damaged cord or plug or after the appliance
malfunction, or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or electrical or mechanical
adjustment.
- If the supply cord is damaged, it must be replaced by an after service agent or a
similarly qualified person by a supply cord of the similar type, in order to avoid a
hazard.
- The use of attachments not recommended or sold by the manufacturer may cause fire,
electric choc or injury.
- Do not use outdoors.
- Do not use in wet places or wet support
- Do not submerge the electric motor in water or other liquid when cleaning
- Do not use extension cords
- Do not unplug by pulling the cord
- Do not use the machine with wet hands or bare feet
- Do not let cord hang over edge of table or counter.
- Acoustic level less than 80 dBA.
- Save these Instructions