USB Board Removal
Prerequisite:
Ensure that the Fan and LCD Module have been disassembled prior
removing the USB board.
1. Disconnect the 50-pin USB board FFC (A) from the mainboard and USB board
connectors
(Figure
50-pin USB board FFC.
2. Disconnect the 45-pin USB board FFC (B) from the mainboard and USB board
connectors
(Figure
3. Remove one (1) screw (E) securing the USB board in place
Figure 1-30. USB Board Removal
Disassembly Procedures
1-30). Then carefully lift to detach the adhesive underneath the
1-30).
(Figure
A
B
0
1-30).
1-23