Related Manuals for Autojack TJ300
Summary of Contents for Autojack TJ300
- Page 1 SAFETY AND OPERATING MANUAL TROLLEY JACK TJ300 ORIGINAL INSTRUCTIONS Made in China TJ300 160120 Version 1...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Precautions………………………….………………………………………01 Machine Details……………………………………………………………………..03 Operation……………………………………………………………………………….04 Maintenance………………………………………………………………………..06 Troubleshooting……………………………………………………………………..07 Declaration of Conformity………………………………………………………09 Parts list ………………….…………………………………………………………….10 Parts Diagram…………………………………………………………………………11 TJ300... -
Page 3: Safety Precautions
- Place jack under lifting points recommended by vehicle manufacturer (see vehicle hand book). Ensure lifting point is stable and centred on Saddle. - NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THIS PRODUCT. TJ300... - Page 4 DO NOT allow untrained persons to operate the jack and DO NOT use jack for purposes other than which it is designed. DO NOT allow persons to ride on the jack. When not in use store jack, fully lowered, in a safe, dry, childproof area. TJ300...
-
Page 5: Machine Details
2. Pump handle socket 3. Floor jack frame Max. Saddle height - 400mm 4. Pump handle hex bolt 5. Pump system Length - 592mm 6. Castor wheel 7. Fixed wheel Weight - 16.4KG 8. Saddle 9. Lifting arm load:135-400mm TJ300... -
Page 6: Operation
It is Attachments & Adapters. recommended that this inspection be made by a Only attachments and/or adapters manufacturer’s or supplier’s supplied by the manufacturer shall be authorised repair facility. used. TJ300... - Page 7 Be sure that the vehicle and the get under or let anyone under jack are on a hard, level surface. the vehicle while lowering. 4. Turn the release valve slowly counter clockwise to lower the vehicle onto the ground. TJ300...
-
Page 8: Maintenance
DO NOT touch the safety overload 6. Carefully and slowly pinch the oil valve (fig.2.V). filler plug to release pressurised air. 7. Repeat above steps until trapped air is completely vented. TJ300... -
Page 9: Troubleshooting
1) Replace packing and/or 1) Pump packing or Jack lifts poorly clean valves. valves malfunctioning. 2) Replace oil. 2) Oil is dirty. 3) Open release valve and 3) Air in the system. pump the handle a few times. TJ300... - Page 10 6) Jack spring damaged or unhooked. 5) Check and fully open release valve. 6) Replace spring or contact local service agent. Jack does not lower at all. 1) Release valve closed. 1) Check and fully open release valve. TJ300...
-
Page 11: Declaration Of Conformity
TJ300... -
Page 12: Parts List
SADDLE PIN SADDLE SIDE PLATE(RIGHT) LOCK WASHER(GB97.1,14) WASHER(GB895,14) NUT(GB6170,M14) BUSHING FRONT WHEEL SADDLE BRACKET BRACKET SHAFT FRONT WHEEL SHAFT LINK SHAFT CASTOR CASTOR FRAME CASTOR PIN CASTOR BOLT(GB5783,M8×22) BEARING RACE WASHER(GB93,8) NUT(GB6170,M8) SIDE PLATE(LEFT) RETURN SPRING POWER UNIT ASSEMBLY EP82-3 TJ300... -
Page 13: Parts Diagram
PARTS DIAGRAM EP82-3 TJ300...
Need help?
Do you have a question about the TJ300 and is the answer not in the manual?
Questions and answers