Pentair Flotec FPCC5030 Installation And Operation Manual page 12

CHARGER/CONTROLLER LED DISPLAY
TABLE IV – ERROR CODE DISPLAYS (LEDS FLASHING)
TABLE V – CONTROL BUTTON FUNCTIONS
CONTROL BUTTON: RESULT OF PUSHING BUTTON:
System Test Pump starts and all LEDs light up.
Will reset the 'Pump ACTIVITY' LED.
When pushed with the 'Silence Alarm' button, the Charger/Controller microprocessor resets and error code resets.
Silence Alarm Toggle; Prevents the audible alarm sounding. Press and release to reset.
Light Toggles the light on the Charger/Controller on and off.
System Reset Press and release 'Test System' and 'Silence Alarm' to reset system.
12
FP983 (06-08-20)