Step 1: Connect Your Equipment - Buffalo AirStation Nfiniti WZR-G300N Quick Setup Manual

1
. Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or
DSL modem.
2
. Connect the Ethernet cable from your cable or DSL modem to the WAN port on your
AirStation. The WAN port is the port closest to the power connector. This is the only port that
will work for your internet connection.
3
. Connect one or more PCs or workstations to any of the four LAN ports on the AirStation with
RJ-45 Ethernet cables.
4
. Power on the cable or DSL modem. Give it at least a minute to boot up.
5
. Connect the power connector to the power port on the AirStation and to a surge protector or
other source of power. Give the AirStation 60 seconds to boot.

Step 1: Connect Your Equipment