Safety Decals; Warranty - Marshalltown BULLET MS90-1913 Manual

13" magnum edge flooring shear
Table of Contents

Advertisement

Available languages

Available languages

If your safety decals are damaged, they can be replaced by contacting Customer Service.
This product is warranted to the original purchaser only, to be free of defects in material and workmanship
under normal use, for 5 years from purchase date. MARSHALLTOWN shall without charge for parts and labor,
repair or replace such parts which are found to be defective. All transportation charges for replacement parts
must be borne by the purchaser.
For warranty service, the product must be delivered, with proof of purchase date, to MARSHALLTOWN.
Contact MARSHALLTOWN Customer Service to determine the best method of delivering the product that is
under warranty. The delivery of the product must be made no later than 30 days after the expiration of the
warranty period.
All implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one
year from date of purchase by the original retail customer and to the extent permitted by law any and all implied
warranties are excluded and disclaimed after the expiration of such period.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitations of
incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights, which vary from state to state.
Exclusion from this warranty:
1. All consequential damages, including pickup and delivery of the unit, communication, mileage charges and/
or rental of a replacement unit during repairs are not covered under this warranty, or are any loss of income
and/or other loss resulting from the failure of the product to function due to a warranty defect.
2. This warranty will not apply when the product becomes inoperative due to misuse, normal wear, neglect,
improper maintenance, accident or freight damage; has not been operated and maintained in accordance
with the instructions furnished in the Operator's Manual; or has been altered or modified without approval
from the factory Service Department.
3. No parts or products are to be returned to the factory without prior written approval from the factory.
4 of 14
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com

SAFETY DECALS

Blade Warning Label
R6166
Handle Warning Label
R7566

WARRANTY

WS2637

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bullet 29987

Table of Contents