Buffalo AirStation WHR-G54S User Manual page 65

DIAG LED Activity Table
DIAG LED Display
Continuous Red
Red flash, 3 times
Red flash, 4 times
LEDs Work But Client PC Cannot Connect to Network
If the LEDs indicate that the network is working properly (Power LED is on, Transmit/
Receive LED blinks), check the TCP/IP settings of the network.
Changing Client TCP/IP Settings in Windows
Consult the LAN Administrator for correct TCP/IP settings.
To add or change TCP/IP Settings:
1. On the Windows task bar, click Start.
2. Select Settings, then Control Panel.
3. Double-click on the Network icon to view Network Properties.
4. From the list of installed components, verify the TCP/IP => wireless LAN adapter
protocol is installed.
Time Description/Action
Starting RAM Error Red flash, 2 times Starting Flash
ROM Error
Starting A problem on the wired LAN side
Starting A problem on the wireless LAN side

Troubleshooting