Table of Contents
Advertisement
16
OPERATION
OPERATION
Control Panel and Remote Control
7
4
3
Power
1
Press to turn the air conditioner ON or OFF.
Fan Speed
2
Press to set the fan speed to Low (Bajo) (F1),
Medium (Medio) (F2) or High (Alto) (F3).
Delay ON/OFF Timer
3
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is on,
set it to automatically turn off from 1 to 24
hours later.
NOTE
● Each press of the Timer
button advances the timer by 1 hour. After
the last press the display returns to the
temperature setting.
Operation Mode
4
Press the Mode (Modo) button to cycle
between 4 types of air conditioner operation:
Energy Saver (Ahorro Energía) / Cool (Frío) /
Fan (Vent.) / Dry (Deshum).
6
5
2
1
(Control Tiempo),
Remote Control
5
3
Energy Saver (Ahorro Energía) - In this
the compressor and fan turn off when the
set temperature is achieved. Approximately
every 3 minutes the fan turns on to allow
the unit sensor to accurately determine if
more cooling is needed.
Cool (Frío)
- This mode is ideal on hot days
to cool and dehumidify the room quickly. Use
the Temp
buttons to set the desired
room temperature and use the Fan Speed
(Nivel Vent.) button to set the desired fan
circulation speed.
Fan (Vent.) - In this mode the fan circulates
air but the compressor does not run. Use
the Fan Speed (Nivel Vent.) button to set fan
speed to High, Medium or Low. In this mode,
you cannot adjust the set temperature.
Dry (Deshum) - This mode is ideal for rainy
and damp days to dehumidify the room rather
than cooling it significantly. Humidity is
removed from the room by the combination
of compressor operation and the fan speed
fixed at Low. The compressor and fan turn
off once the set temperature is reached.
Fan speed cannot be adjusted in Dry (Deshum)
mode.
1
2
4
Advertisement
Table of Contents
