Advertisement

USER MANUAL
GB
3-36
Washing Machine •
21/9/2020

Advertisement

Table of Contents
loading

Summary of Contents for eta 355490000

  • Page 1 USER MANUAL 3-36 Washing Machine • 21/9/2020...
  • Page 2: Table Of Contents

    1. SAFETY INSTRUCTIONS 2. TECHNICAL SPECIFICATIONS 3. INSTALLATION 4. CONTROL PANEL OVERVIEW 5. USING YOUR WASHING MACHINE 6. PROGRAMME TABLE 7. CLEANING AND MAINTENANCE 9. TROUBLESHOOTING 10. AUTOMATIC FAULT WARNINGS AND WHAT TO DO...
  • Page 3 Washing Machine 355490000 Thank you for choosing this product. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
  • Page 4: 1. Safety Instructions

    1. SAFETY INSTRUCTIONS Operating voltage / frequency (220 – 240) V~ / 50 Hz Total current (A) Water pressure (Mpa) Maximum 1 Mpa / Minimum 0.1 Mpa Total power (W) 2200 Maximum washing capacity (dry laundry) (kg) • Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.
  • Page 5 NOTE: If you want to keep this manual in electronic form, you can find it for download at www.eta.cz. Read this user manual carefully. Your machine is for domestic use only. Using it for commercial purposes will cause your warranty to be cancelled.
  • Page 6 • Residue may build up on detergent and softeners exposed to air for a long period of time. Only put softener or detergent in the drawer at the beginning of each wash. • Unplug your Washing Machine and switch off the water supply if the Washing Machine is left unused for a long time.
  • Page 7 • Do not exceed the maximum load for the washing programme you have chosen. Never force the door open when your Washing Machine is running. • Washing laundry containing flour may damage your machine. • Please follow the manufacturers’ instructions regarding the use of fabric conditioner or any similar products that you intend to use in your Washing Machine.
  • Page 8 3. Pull the down the emergency opening mechanism with the help of a tool and open the door at the same time. 4. Doors, move the emergency opening handle to the open position after being closed again,if the door remains locked. Read these warnings.
  • Page 9 • Do not touch your Washing Machine if your hands or feet are wet. • A damaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by qualified personnel. Risk of flooding •...
  • Page 10 Risk of fire and explosion Risk of falling and injury • Do not climb on your Washing Machine. • Make sure hoses and cables do not cause a trip hazard. • Do not turn your Washing Machine upside down or on its side. •...
  • Page 11 • Keep packaging material away from children. • Poisoning and irritation may occur if detergent and cleaning materials are consumed or come into contact with the skin and eyes. Keep cleaning materials out of the reach of children. 1.2 During Use •...
  • Page 12 • Only use your machine for laundry that is label ledas suitable for washing by the manufacturer. • Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine. If the bolts are not removed they may cause heavy vibration, noise and malfunction of the machine and cause the guarantee to be void.
  • Page 13 1.4 Savings Information Some important information to get the most efficient use out of your machine: • Do not exceed the maximum load for the washing programme you have chosen. This will allow your machine to run in energy saving mode.
  • Page 14: Technical Specifications

    2.2 Technical Specifications 2. TECHNICAL SPECIFICATIONS Operating voltage / (220 – 240) requency (V/Hz) V~ / 50 Hz Total current (A) Max.: 1 Mpa Water pressure (Mpa) Min.: 0.1 Mpa Total power (W) 2200 Maximum dry laundry capacity (kg) Spinning revolution 1400 (rev / min) Programme number...
  • Page 15 Loosen the transit bolts by turning To increase the height of the machine, them anticlockwise with an appropriate turn the feet clockwise. To decrease spanner. the height of the machine, turn the feet Remove the transit bolts with a straight anticlockwise.
  • Page 16 3.4 Water Inlet Hose Connection • Connect the white capped end of the water inlet hose to the white water inlet valve on the rear side of the machine and the red capped end of the hose to the red water inlet valve (if applicable).
  • Page 17: Control Panel Overview

    3.5 Water Discharge Connection 4.1 Detergent Drawer • Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment. • Never attempt to extend the water drain hose. • Do not put the water drain hose from your machine into a container, bucket or bathtub.
  • Page 18 4.2 Sections 4.3 Program Dial Main wash detergent compartment: • To select the desired programme, turn This compartment is for liquid or powder the programme dial either clockwise or detergents or limescale remover. The fluid anti-clockwise until the marker on the detergent level plate will be supplied inside programme dial points to the chosen your machine.
  • Page 19: Using Your Washing Machine

    Close zips and fasten any hooks and USING YOUR WASHING MACHINE eyes. 5.1 Preparing Your Laundry Remove the metallic or plastic hooks of curtains or place them in a washing net or bag. Reverse textiles such as pants, knitwear, t-shirts and sweat shirts. Wash socks, handkerchiefs and other small items in a washing net.
  • Page 20 • Open the door of your machine. • If your clothes are only slightly soiled, • Spread your laundry evenly in the do not pre-wash. Put a small amount machine. of detergent (as specified by the manufacturer) into compartment II of NOTE: Take care not to exceed the detergent drawer.
  • Page 21 Turn on the water supply. • If the symbol of the auxiliary function • Open the machine door. is flashing in the electronic display, the • Evenly spread your laundry in the selected auxiliary function will not be machine. enabled. •...
  • Page 22 NOTE: After selecting the delay You can make use of these auxiliary functions function, you can select other functions on washing depending on the types of stains. without touching the “Start/Pause” key, Warning: Do not let the stains on your and then you can touch the “Start/ laundries to get dry and stuck in order Pause”...
  • Page 23 5. Spin speed selection NOTE: Before starting your machine, you can switch between stain types. Once you have started the machine, you cannot cancel or change the selected stain type. You can cancel the washing program of your machine, and select the correct stain type and restart the program.
  • Page 24 1. Prewash auxiliary function NOTE: When you want to select the extra rinse auxiliary function, if does not appear on the display, this means that this feature is not available in the selected washing program. 3. Easy ironing auxiliary function You can use this auxiliary function to perform pre-wash before the main wash cycle for your highly soiled laundry.
  • Page 25 To enable the anti-allergy auxiliary function, NOTE: If you load the machine with half or less than half of the laundry keep pressing the options key until the capacity of the selected washing antiallergy function symbol turns on. program, the machine will detect If the anti-allergy LED is constantly on it thanks to the half load detection...
  • Page 26 • If you want to cancel a running program, turn the program knob to position. Your machine will stop washing process and the program will be cancelled. To drain the water in the machine, turn the program knob to any program position. Your machine will drain the water and cancel the program.
  • Page 27: Programme Table

    6. PROGRAMME TABLE Laundry type / Descriptions (recommended weight of the laundry… eg „maximum 4 kg“… for the first few washing programs applies in case the consumer wants to dry the laundry in the dryer) Very dirty, cotton and flax textiles. (Underwear, BAVLNA 60-90 linen, tablecloth, towel (maximum 4,0 kg),...
  • Page 28 NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS. (*) Washing water temperature of the programme is the factory default. (**) If your machine has the rapid wash auxiliary function, you can enable the quick wash option on the display panel and load the machine with 2 kg or less laundry to wash it in 30 minutes.
  • Page 29 Energy Programme Water max. Remaining Consumption Duration Consumption Temperature Moisture Content kWh/cycle Hours:Minutes Litres/Cycle °C % 1400 Rpm 2,33 3:12 1,01 3:35 0,99 0,50 0,33 3:35 2:48 2:30 0,62 1:50 1,02 1:00 0,21 1:36 29 / 36...
  • Page 30 6.1 Important Informations • Use detergents, softeners and other additives suitable for automatic washing machinesonly. Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. • We recommend that periodic cleaning for washing machine every 2 months.
  • Page 31: Cleaning And Maintenance

    7.2 Water Inlet Filters CLEANING AND MAINTENANCE Water inlet filters prevent dirt and foreign 7.1 Warning materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive sufficient water, although your water supply is on and the tap is open.
  • Page 32 7.3 Pump Filter Remove any foreign materials from the filter with a soft brush. After cleaning, re-fit the filter by inserting it and turning clockwise. When closing the pump cover, ensure that the mountings inside the cover meet the holes on the front panel side. Close the filter cover.
  • Page 33 Liquid detergent apparatus (*) For the cleaning and maintenance of the liquid level detergent apparatus, remove the apparatus from its location as shown in the picture below, and thoroughly clean the remaining detergent residues. Replace the apparatus. Make sure that no residual material remains inside the siphon.
  • Page 34: Troubleshooting

    9. TROUBLESHOOTING Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: • Unplug your machine from the mains power supply. •...
  • Page 35 FAULT POSSIBLE CAUSE TROUBLESHOOTING Press the Start/Pause button. To stop the foam, dilute one tablespoon of softener into 1/2 Excessive amount of litre of water and pour into the detergent used. Excessive foam detergent drawer. Press the is formed in the Start/Pause button after 5-10 detergent drawer.
  • Page 36: Automatic Fault Warnings And What To Do

    Turn off the tap and contact the nearest authorised service agent. (*) See the chapter regarding maintenance and cleaning of your machine. We reserve the right to change technical specifications. For any further information, please write to: info@eta.cz / 36...
  • Page 37 Notes:...
  • Page 38 Notes:...
  • Page 39 Notes:...
  • Page 40 Adress: ETA a.s. náměstí Práce 2523 760 01 Zlín...

Table of Contents