Charging With The Solar Panel; Monitoring The Charge Status; Charging Usb Devices; Led Torch - CALIMA 46038 Operating Instructions Manual

charge status display flashes during charging. When all four lamps are constantly lit, the power bank is fully charged. See Table 1. Disconnect the
charging device from the socket, and remove the USB cable from the charging device and the power bank. Replace the rubber cap, to protect the
connections against dirt and damage.
Lamp 1
Lamp 2
Lamp 3
Lamp 4

6.4 CHARGING WITH THE SOLAR PANEL

Disconnect all connected devices from the power bank before charging.
Place the power bank in sunlight, with its solar panel facing upwards (Position 3
in the overview). The first lamp of the charge status display lights up green when
the power bank is charging, see Figure 2.
The solar panel can also use artificial light to generate electricity.
Do not expose the solar panel to strong sunlight for a long period of time. This may damage it.

6.5 MONITORING THE CHARGE STATUS

Disconnect all connected devices from the power bank. Press the switch (Position 2 in the overview) to activate the charge status display. The
charge statuses are listed in Table 1. The charge status display will switch off automatically after approx. 5 seconds.

6.6 CHARGING USB DEVICES

Connect a USB device to one of the USB outputs (Positions 4 and 6 in the overview).
If you want to use the power bank to charge two USB devices at the same time, the power bank must be fully (100%) charged.
If charging does not start automatically, press the switch once.
Do not leave the device unattended during charging.
When the connected USB device is fully charged, switch off the power bank. Press the switch for approx. 2 seconds. Remove all cables from the
power bank, and replace the rubber cap.

6.7 LED TORCH

To switch on the LED torch (Position 5 in the overview), quickly press the switch twice in succession (double-click). To switch the torch off, quickly
press the switch twice in succession again.
0 – 25% 25 – 50 %
flashing constant
flashing
50 – 75 % 75 – 99 %
constant constant
constant constant
flashing constant
flashing
Figure 2: Charging with the solar panel
100%
constant
constant
constant
constant
Table 1