Delphi Xm Skyfi Marine Kit Components - Delphi SkyFi SA10046-11B1 Installation Manual

Delphi XM SKYFi Marine Kit Set-up
2
The Delphi XM SKYFi Marine Kit is designed for XM radio reception on recreational marine
craft such as fishing boats, sport boats, yachts, and sailboats. Your Delphi XM SKYFi Marine
Kit contains the following components:
Cradle Marine mount with 1-1/2"
extension, flexible adhesive
Splash-proof case with
rubber gasket
Figure 1. Delphi XM SKYFi Marine Kit components
XM Marine
Antenna with
mounting pad, and solid 20' coaxial
mounting plate antenna cable
XM Universal
Audio Adaptor
Caution: The Delphi XM SKYFi Marine Kit is splash-
resistant, NOT waterproof. The Delphi XM SKYFi Marine
Kit is not intended for use on personal watercraft (i.e.,
Jetskis and similar). Doing so will void your warranty.
Caution: Connect only appropriate input devices to
For use when mounting
the cradle jacks. Connecting an incorrect input device
the ball-joint mounting
may damage the system and/or the external electronic
bracket, your kit also
device. It is recommended that you use only the D/C
includes:
power adaptor that came with your Delphi XM SKYFi
Marine Kit. If you need to use a different adaptor, it must
• Extra Adhesive Pad
be a 6V, 1000mA DC adaptor and must contain a unified
• Surface Preparation
polarity-type jack, identified by the
Cleaning Kit
• Alcohol Prep Pad
• Two 5/8" rubber
Before You Begin
sealing bands
Please read all instructions thoroughly
before installing your Delphi XM SKYFi
Marine Kit.
Note: See SKYFi Operating Guide
for important user information.
symbol.