Long-Term Storage (30 Days Or More); Preparing The Chainsaw For Use After Long-Term Storage - Champion 100642 Operator's Manual

100642 - ChAiNSAw

Long-term Storage (30 days or more)

1. Remove the fuel cap, tip the chainsaw and drain the fuel into
an approved container. Reinstall the fuel cap.
2. Start the chainsaw engine and allow it to run until fuel
starvation and shuts off. This ensures that all fuel has been
drained from the carburetor.
3. Allow the engine to cool. Remove the spark plug and put
5 drops of any high quality motor oil or 2-cycle oil into the
cylinder. Pull the starter rope slowly to distribute the oil.
Reinstall the spark plug.
Preparing the Chainsaw for Use after Long-
term Storage
Remove the spark plug and drain all of the oil from the cylinder.

Do not use ethanol blended fuel that has been stored for more
than 30 days. Dispose of old fuel according to federal, state
and local regulations.
NOTiCE
31
STORAGE