Samlexpower SEC-1250UL Owner's Manual page 33

SECTION 11 |
Model No.
INPUT
Input Voltage and Frequency
Input Current
AC Input Connection
OUTPUT
Bulk Stage Current
Charging Voltages
No. of Charging Banks
Maximum Battery Capacity
Output Connections
CHARGING PROFILES
Charging Stages
Threshold of Current for
Change Over
Battery Temperature
Compensation
MONITORING
LED Display
Analogue Meters
REMOTE CONTROL (Optional)
Remote Control & Remote
Control Port
Specifications
230 VAC, 50/60Hz (By internal Jumper setting)
Attached Power Cord
Full Power Bulk Stage
Half Power Bulk Stage
Current (Selected by
3 Stages (Default) :
• Bulk, Absorption and Float
• Timed Absorption Stage
o 4 Hours (Default)
o 8 Hours (By DIP Switch setting)
2 Stages (By DIP Switch setting):
• Bulk and Float
From Float to Absorption
From Absorption Level 2
Battery Temperature Sensor Model TF-500 (included)
Temperature Coefficient
Green LED indicates "Half Power Mode" is selected
120VAC, 50/60 Hz (Default)
(108 to 132VAC)
(207 to 253VAC)
At 120VAC
At 230VAC
Current (Default)
Switch):
Bulk Stage
Absorption, Level 1
Absorption, Level 2
Float Stage
300Ah
Tubular Hole with Set Screw
Hole Diameter
Set screw size
Level 1
to Float
Voltmeter
Ammeter
RJ-45 (8P8C) Modular Port
Optional Remote Control Model 900-RC
(comes with 10M cable)
SEC-2425UL
10.1A
5.5A
6 ft length
3 x AWG#16 wire size
NEMA5-15P Plug
25A
12.5 ±1A
27.0± 0.05VDC
27.0± 0.05VDC
28.8 ± 0.05VDC (Default)
28.0 ± 0.05VDC (By DIP
Switch setting)
27.0± 0.05VDC
2
7.9 mm ; 5/16 in
5/16" x 24TPI
6±1A
3±0.5A
-56 mV/°C
0 to 30V
0 to 30A
SAMLEX AMERICA INC. | 33