Advertisement
Unroll the power cord completely.
Check that the tension in force in the country where you are, corresponds to that
indicated on the apparatus.
Connect the apparatus in a correct socket-outlet, (and connected to the ground if
the unit is Class I), to avoid any danger.
Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
Stand the appliance on a table or flat & stable surface.
The item must not be left unattended when it is connected to main supply.
The item is not to be used, if it has been dropped or if there are visible signs of
damage or if it is leaking.
Never modify the appliance in anyway.
Open the top cover of the tank.
Fill the water tank with water desired capacity.
NOTE: Do not exceed the maximum capacity of this tank marked on the water
gauge.
Put the filter into the filter cone, then add desired amount of coffee in the filter.
Close the cover.
Plug into standard household wall outlet.
Switch on, brewing begins.
When the water is boiling it run out on the coffee.
When the water finished to flow, Switch off the appliance.
NOTES:
For best flavour, remove the filter and coffee after every use.
Remove it carefully, for they are hot.
Before cleaning, always switch off the appliance, disconnect the apparatus and let
it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) in contact with food can be washed in hot water with
sponge and soft detergent or put in the dishwasher.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place.
USE
CLEANING AND MAINTENANCE
STORAGE
7
Advertisement
