Table of Contents
Advertisement
en Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
4.2 Displays/symbols
The displays show selected values and functions.
Display
Name
Operating status
-
Heat settings
/
Residual heat
Keep-warm function
PowerBoost function
Timer
4.3 Touch fields
Touch fields are touch-sensitive surfaces. To select a
function, touch the relevant field.
Touch
Name
field
Main switch
PowerBoost function
Hotplate selection
Childproof lock
Wipe protection
Settings range
Activating the dual-circuit hotplate
Activating small extended cooking zone
Activating large extended cooking zone
Keep-warm function
Timer
Stopwatch function
Notes
¡ Depending on the operating condition of the hob,
the touch fields that can currently be selected light
up brightly or dimmed. If you touch one of these
fields, the relevant function is activated.
6
¡ Touch fields which cannot currently be selected do
not light up.
¡ The settings of the hotplates currently selected light
up brightly.
¡ Always keep the control panel dry. Moisture impairs
the function.
¡ Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4 Hotplates
You can find an overview of the different activations of
the hotplates here.
If you operate the activations, the relevant displays light
up.
If you switch on a hotplate, it will switch to the setting
last selected.
Hotplate
Single-circuit
hotplate
Dual-circuit
hotplate
Notes
¡ Dark areas in the glow pattern of the hotplate are
part of the technical design. They do not affect the
functionality of the hotplate.
¡ The hotplate regulates the temperature by switching
the heat on and off. The heat may also switch on
and off when on the highest setting.
– This protects easily damaged components from
overheating.
– The appliance is protected from electrical over-
load.
– Better cooking results are achieved.
¡ With multi-circuit hotplates, the heating of the inner
filament circuits and the heating of the activations
may switch on and off at different times.
Activating and deactivating
Touch
.
Advertisement
Table of Contents
