Step Seven:
Attach the HEPA leg stand to the outlet connector, as shown above, by securing and fastening (4) 3/8" x 1" hex
bolts, (8) 3/8" flat washers, and (4) 3/8" nuts.
Step Eight:
Attach the rubber gasket to the square top of the HEPA filter, as shown above. Take the filter adapter and attach
it to the square top of the HEPA filter with (16) 5/16" x 1" hex bolts and 5/16" flat washers. Tighten and secure
all bolts and nuts.