Operation; Technical Data; Setup And Function; Features Of Function And Equipment - Busch-Jaeger Busch-Infoline 1511 U Operating Instructions Manual

Operating Instructions
®
Busch-Infoline
Pos: 14 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bedienung @ 11\mod_1279185541649_15.docx @ 83043 @ 1 @ 1
4

Operation

Pos: 15 /#Neustruktur#/Online-Dokumentation (+KNX)/Bedienung/Infoline/Bedienung 1511 @ 25\mod_1341320270943_15.docx @ 221088 @ @ 1
Cancel button
After having been triggered, the alarm is deactivated via the cancel button.
Storing the alarm status
The storage of the alarm status is an option. This function can be activated and deactivated.
Pos: 16 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Technische Daten @ 11\mod_1279185386320_15.docx @ 83019 @ 1 @ 1
5

Technical data

Pos: 17 /#Neustruktur#/Online-Dokumentation (+KNX)/Technische Daten/Infoline/Technische Daten - 1511 @ 25\mod_1339656176350_15.docx @ 217458 @ @ 1
General
Nominal voltage
Rated frequency
Nominal current
Power loss
Loop current
Min. short-circuit / interruption duration
Protection class
Type of protection for device
Operating temperature range
Switching contacts
Normally open contact
Changeover contact
Pos: 18 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Aufbau und Funktion @ 11\mod_1279185435352_15.docx @ 83027 @ 1 @ 1
6

Setup and function

Pos: 19 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Funktions- und Ausstattungsmerkmale @ 23\mod_1336557630140_15.docx @ 209136 @ 2 @ 1
6.1

Features of function and equipment

Pos: 20 /#Neustruktur#/Online-Dokumentation (+KNX)/Aufbau und Funktion/Infoline/Funktionen - 1511 @ 25\mod_1339656193256_15.docx @ 217473 @ @ 1
Monitoring insert for monitoring a current loop for interruption or short-circuit. The minimum short-circuit /
interruption duration of the loop until an alarm is triggered may be adjusted with a jumper. The alarm status may
be saved (this can be deactivated) and a reset button is provided.
Pos: 21 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1
Operating Instructions | 1473-1-8175
15 - 29 V AC / 18 - 35 V DC
50/60 Hz
70 mA AC / 40 mA DC
1 W
5 mA
0.1 s / 2.5 s
IP 20
SELV
5 ... 40 °C
1 A, 30 VA / W, potential-bound
42 V AC / 60 V DC, 30 VA / W, floating
Operation
— 4 —