Kamino BBQ 132736 User And Assembly Instructions page 13

Assembly EN
Step 5
18
28
12
Now the two lids will be attached to the grill.
For this you need the hinges, component
12
(4x needed), which you screw with the
28
screws M5 x 10 (16x needed) at the back
of the grill. Then the two lids, components
17 18
and , are also fixed to the hinge with
these screws so that the lids can be opened
and closed properly.
In addition, the chimney is screwed on the
outer right side of the barrel from the inside
29
with the screws
Step 7
19
Next, screw together the open end of com-
14
ponent with that of component 2 using
27
screws M6 x 12 (2x required).
The grill racks, components
now be placed in the barrel grill.
Next, attach the shelf surface, component
3 , to the horizontal support struts, com-
2
ponent , using screws
required).
132736_Kamino_BBQ_Anleitung_A4_DE_EN_FR_IT_ES_35S.indd 13
17
1
M6 (2x required).
20
27
2
19 20
and , can
26
M6 x 25 (6 x
Step 6
31
22
23
Now the 3 handles, component
attached to their intended positions. Please
use the screws
31
and part (6x) and fasten the handles as
shown in the illustration.
In addition, component
screwed to the front of the barrel grill. This
will later serve as a fixture for the shelf sur-
face. Please use the screws
(2x required). Das Thermometer, Bauteil
, wird an der dafür vorgesehenen Stelle an
dem Deckel des Grillfasses befestigt. Die
dafür benötigte Schraube ist bereits am Ther-
mometer vorhanden.
Step 8
26
3
Finally, components
into component
Now the smoker barrel grill is ready and can
be used.
13
33
27
22
, are
23
M6 x 65 (6x required)
2
(2x provided) is
27
M6 x 12
4
9
4 and 9 are hooked
11 under the grill.
2
33
05.12.19 12:26