The following are the available Email Account
settings:
•
Email Address — Select this setting to edit
your Email address.
•
User Name — Select this setting to edit the
user name.
•
Password — Select this setting to edit the
password for your account.
•
Protocol — Select this setting to choose the
protocol to be used to send and receive
Emails including POP3, POP3/SSL, CMPCP,
and CMPCP/SSL. Contact your service
provider for information.
•
Server — Select this setting to edit the
address of the server that provides your mail.
•
Port (incoming) — Select this setting to edit
the port value used for incoming traffic.
•
SMTP Server — Select this setting to edit
the address of the server through which you
send your Email.
•
Port (outgoing) — Select this setting to edit
the port value used for outgoing traffic.
•
Authentication — Select this setting to
select the authentication type for your Email.
•
Data Connection — Select this setting to
choose the network to use for data
connection.
•
Reply with the original — Enable this setting
to include the original messages when you
reply to Emails.
•
Pull Frequency — Select this setting to
choose how often automatic POP3 retrievals
are performed.
•
Number to sync each time — Specify the
maximum number of Emails to sync on every
connection. You can select 25 Mails, 50
Mails, 100 Mails, or All.
•
Read Limit — Select this setting to set the
read limit for your Emails if you wish to set a
send/receive message size limit. Setting the
limit to Headers Only allows you to only see
the subject of Emails.
•
From name — Select this setting to enter
your full name to be displayed to recipients.
Using Email Features
117