Functional Description; Switch Action; Adjusting The Shoe - Makita JR3061T Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and unplugged before adjusting or
checking function on the tool.

Switch action

WARNING:
Before plugging in the tool,
always check to see that the switch trigger actu-
ates properly and returns to the "OFF" position
when released.
WARNING:
Switch can be locked in "ON"
position for ease of operator comfort during
extended use. Apply caution when locking tool in
"ON" position and maintain firm grasp on tool.
CAUTION:
Return the switch trigger to the
"OFF" position in case of accidental unplugging,
blackout, or the power is cut unintentionally.
Otherwise the tool may start suddenly when the
power returns and it may result in personal injury.
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button. To stop the tool from the
locked position, pull the switch trigger fully, then release
it.
1
► 1 . Switch trigger 2. Lock button

Adjusting the shoe

When the recipro saw blade loses its cutting efficiency
in one place along its cutting edge, reposition the shoe
to utilize a sharp, unused portion of its cutting edge. This
will help to lengthen the life of the recipro saw blade.
The position of the shoe can be adjusted in five levels.
To reposition the shoe, open the shoe adjusting lever and select
the suitable position, then close the shoe adjusting lever.
1
► 1 . Shoe 2. Shoe adjusting lever
NOTICE:
it is extended more than the
of
adjusting lever forcibly in such a position. It may
result in breakage of the lever.
NOTE: The shoe cannot be adjusted without opening
2
the shoe adjusting lever fully.
Lighting up the front lamp
► 1 . Lamp
CAUTION:
source of light directly.
To turn on the lamp, pull the switch trigger. Release the
switch trigger to turn it off.
NOTE: Use a dry cloth to wipe the dirt off the lens of
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
5 ENGLISH
The shoe cannot be secured if
marking
stamping. Do not close the shoe
Do not look in the light or see the
2
1