Advertisement
WPA requirements
Windows XP users must use the Wireless Zero Configuration Service with
Service Pack 1 (SP1) and the WPA patch installed. This software can be
downloaded from http://www.microsoft.com.
WIndows 98SE/2000/ME users require a third-party WPA supplicant such as
Odyssey by Funk Software. For more information visit: http://www.funk.com
For more information about the Wireless Zero Configuration Service, refer to the
Microsoft Support Web Site: http://www.microsoft.com
NOTE: Buffalo Technology recommends that users of the Wireless Zero
Configuration Service upgrade to the latest version available free at
www.microsoft.com.
Step
Configuring Wireless Zero
Configuration Service
Right click the networking icon in
the taskbar and select View Available
Wireless Networks to display a list
of available wireless networks. Select
an access point network name or SSID
and click the Connect button to
establish a connection.
Select a network name or access
point and click the Advanced button
to
enter
WEP/WPA/WPA-PSK
key into the appropriate field, if
any is necessary and click the
Connect button.
If no Wireless Networks Tab is available,
see step 2C.
NOTE: If configuration is successful,
skip step 2C.
4
an
SSID
and/or
encryption
Advertisement
