Advertisement
Depending on the operating system, some screens may vary. However, by accepting
default installation settings, Client Manager should install properly.
For more information about configuring and operating your 54Mbps Wireless
Desktop PCI Adapter and Client Manager, refer to the Buffalo Support Web Site:
http://www.buffalotech.com/wireless/support.
Connecting with Client Manager
Note: Make sure your Access Point is operational prior running Client
Manager.
Click the Finish button to
complete the installation of
Client Manager. Restart your
computer.
Note: The 54Mbps Desktop
PCI Adapter
Manager will not function prop-
erly until you reboot the system.
Open Client Manager
Survey button.
Click Refresh.
Select the Access Point to connect to.
Add WEP password if applicable.
Click Connect
Client Manager has associated with the access
point
Close Client Manager.
11
Client
and
and Click the
Advertisement
