Advertisement
Initial Camera Settings
-
Insert and Format an SD memory card.
-
Set Date and Time.
-
Set REC Mode to "P" Program Auto.
-
Set Still Image Size to "14M."
-
Set Burst Settings to "Single."
-
Set ISO to "80."
-
Set White Balance to "WB Auto."
-
Set Focus to "Center AF."
-
Set Metering Mode to "Center."
-
Set DRO to "DRO standard."
-
Set Flash to "On
-
Set Red-Eye Reduction to "Off."
NOTE: If overexposure occurs, use "-" exposure compensation and/or back
away from your subject and zoom in. When using an AF35 strobe or
manual controller, turn the power down.
External Accessory Lenses
- Attach 46mm threaded #6420.46 Ikelite W-20 Wide-Angle Lens or other
compatible lenses directly to the front of the port.
- Attach 67mm threaded #6420 Ikelite W-20, Inon Type II and Epoque
wide-angle lenses using the #9306.81 port adapter. This adapter may
also be used to attach other compatible 67mm threaded macro lenses.
- Attach bayonet style Inon macro or UWL-100 28AD, UWL-105AD and
UFL-165AD wide angle or macro lenses using the #9306.79 port adapter.
Moderate to extreme vignetting (shading in the corners) will be present in
the widest setting when using an external accessory lens. This effect can
be eliminated by zooming in slightly.
always use flash."
3
Advertisement
