DeWalt D215851 Manual page 25

Safety instructions
Observe the safety regulations in the instruction
manual of the Power Tool to be connected to
this attachment. Also observe any applicable
additional safety rules. Read the following
safety instructions before attempting to
operate this product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Keep children away
Do not let children come into contact with the
tool or its attachments. Keep all people away
from the work area.
3 Dress properly
Do not wear loose clothing or jewellery.
They can be caught in moving parts. Preferably
wear rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
4 Wear safety goggles
Also use a face or dust mask in case the
operations produce dust or flying particles.
5 Beware of maximum sound pressure
Take appropriate measures for the protection of
hearing if the sound pressure of 85 dB(A) is
exceeded.
6 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
7 Use appropriate tool
The intended use is laid down in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which
it was intended. Warning! The use of any
accessory or attachment or performance of any
operation with this tool, other than those
recommended in this instruction manual may
present a risk of personal injury.
8 Have your Power Tool Attachment repaired
by an authorized D
Repair of your Power Tool Attachment being a
matter of precision and skill, always take it to
your D WALT Authorized Repair Agent.
E
WALT repair agent
E
Package contents
The package contains:
1 Drill stand
1 Feed handle
1 Mounting bracket
4 Mounting screws
1 Allen key, 6 mm
1 Allen key, 8 mm
1 Instruction manual
1 Exploded drawing
● Check for damage to the tool, parts or
accessories which may have occurred during
transport.
● Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. A1 & A2)
Your D215851 drill stand has been designed to
extend the capabilities of your D
drilling machine. The stand enables set up in both
vertical and horizontal applications. Establishing
angles ranging from 0 to 45°, the stand can also be
used in slope applications.
The drill stand is suitable for use with the following
D WALT models: D21585.
E
Fig. A1
1 Carriage
2 Carriage lock
3 Transport handle
4 Feed handle
5 Drill holder
6 Column
7 Angle drilling scale
8 Angle adjustment lever
9 Base
10 Wheels
11 Air level for vertical applications
12 Air level for horizontal applications
13 Friction knob
14 Drilling depth scale
15 Stabilizer bolts
16 Hose connection
Optional accessories (fig. A2)
Consult your dealer for further information on the
appropriate accessories.
E N G L I S H
WALT diamond
E
25