Harbor Mate FC-2021-BW Instructions

Beach fishing cart

Advertisement

General Guidelines

• It is the user's responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product's owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and prac-
tice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.

Safety

• Small parts are included. Please keep beach fishing cart away from children while assembling.
• For the safe and proper performance of the cart, please check whether all the screws and nuts are
securely fastened and correctly installed before use.
• Please be careful with the sharp corners during assembly. We recommend wearing gloves to pre-
vent the undesired injury.
Rev. 111120
Beach Fishing Cart
Instructions for Part # FC-2021-BW
1-888-651-3431
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FC-2021-BW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Harbor Mate FC-2021-BW

  • Page 1 Beach Fishing Cart Instructions for Part # FC-2021-BW General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use. • It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product.
  • Page 2 Parts Part Description Quantity Beach Fishing Cart Handle Holder-1 Holder-2 Wheel Axle U-Bolt Lock Nut M8 Washer Split Pin D-Pin Rev. 111120 Page 2 1-888-651-3431...
  • Page 3 Assembly Step 1: Install the axle 1. Prepare the main body, wheel axle, two U-bolts, and four lock nuts. 2. Place the axle directly below the two holes at the bottom of the main body. Figure 1 3. The U-bolts pass through the holes from the bottom of the axle upwards.
  • Page 4 Product Warranty and Liability GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.

Table of Contents