Advertisement
General Guidelines
• It is the user's responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product's owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and prac-
tice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
Safety
• Check that all hardware is properly tightened before use.
• Lubricate the wheels periodically.
• Never exceed the 130 lb. weight limit.
• This carrier is designed for moving motors short distances, for storage, and while performing main-
tenance. Do not use for anything other than its intended purpose.
• Securely chock the wheels while in storage or working on a motor mounted on the motor carrier.
• When storing a motor, it is recommended to securely chock the wheels and position it against a
wall with the handle facing outward.
• Never leave a motor and/or motor carrier unattended. Do not use on uneven ground.
• Keep away from children.
• Never run the motor while on the stand.
• Never tow the carrier behind any kind of vehicle.
• When carrying any heavy motor and positioning it on the carrier, it is recommended to use two
people.
Rev. 111319
Outboard Motor Cart
Instructions for Part # OMC-F130
DiscountRamps.com • 1-888-651-3431
Page 1
Advertisement
Table of Contents
Related Manuals for Harbor Mate OMC-F130
Summary of Contents for Harbor Mate OMC-F130
- Page 1 Outboard Motor Cart Instructions for Part # OMC-F130 General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use. • It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product.
- Page 2 Parts Part Description Quantity Part Description Quantity Handle Tube Turn Knob M8x40 Support Tube Wheel Vertical Straight Tube - 32”L Plastic Block Handle Straight Tube - 29-3/4”L M6x85 Bolt Bottom Straight Tube - 14-3/4”L M6x70 Bolt Axle M6x60 Round Head Bolt Gas Tank Strap M6x40 Round Head Bolt Foot Tube...
- Page 3 Assembly Note: First, only hand-tighten parts. When assembly is complete, tighten all hardware with tools. Step 1. Connect the bottom straight tubes (E) to the axle (F) using M6x40 bolts (P), lock washers (Q), and nuts (R). (1a) (1b) Step 2. Connect the vertical straight tubes (C) to the assembly using M6x40 bolts (P), lock washers (Q), and nuts (R).
- Page 4 Step 5. Connect the two assemblies. Fit the bolts of the foot tube assembly into the holes of the bottom straight tubes on the axle assembly. Secure in place with lock washers (Q) and nuts (R). (5a) (5b) Step 6. Connect the handle tube (A) to the handle straight tubes on the assembly. First, fit the M6x85 bolts (M) through the upper holes and secure with lock washers (Q) and nuts (R).
- Page 5 Step 8. Attach the wheels (K) to the axle. Remove the nut and one washer, slide the tire on, and replace the washer and nut. Secure with a 19mm wrench. Do not overtighten - wheels should be able to turn freely. (8a) (8b) Step 9.
- Page 6 Product Warranty and Liability GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.
Need help?
Do you have a question about the OMC-F130 and is the answer not in the manual?
Questions and answers