Download Print this page

PASCO Potassium PS-3520 Instruction Sheet

Ise probe

Table of Contents

Download this manual

Potassium ISE Probe

Cotton

Included Equipment

Potassium ISE Replacement Module

Potassium ISE (Cl

) Probe

Storage Bottle

BNC Male-to-Female Cable

PS-3520

*DO NOT

let the BNC

connector

at the top of

the unit get

wet.

Reference

Chamber

Item

Included Equipment

Potassium Standard Solution 1000 ppm

Potassium Reference Fill Solution

Potassium Ionic Strength Adjuster (ISA)

I n s t r u c t i o n S h e e t

012-15722A

Item

Table of Contents

Need help?

Do you have a question about the Potassium PS-3520 and is the answer not in the manual?

Page 1 I n s t r u c t i o n S h e e t 012-15722A Potassium ISE Probe PS-3520 *DO NOT let the BNC connector at the top of the unit get wet. Reference Chamber Cotton Included Equipment Item Included Equipment Item...
Page 2 2. Thoroughly rinse the electrode with distilled water. Wipe carefully with a clean lab wipe. • PASPORT High Precision pH/Temperature with ISE/ORP Amplifier (PS-2107) with a PASCO 3. Return the electrode to the storage bottle when it is interface (see www.pasco.com for information) not in use.
Page 3 If the electrode slope is still outside the normal range after this procedure, you must replace the sensing Software Help module. See the SPARKvue Help or PASCO Capstone Help for Reading a Sample with the Electrode information about collecting, displaying, and analyzing data.
Page 4 7. Determine the sample concentration using the data analysis tools in the software. Limited Warranty Electrode Storage For a description of the product warranty, see the PASCO catalog. Copyright Short Term (over night or the weekend): This PASCO scientific instruction sheet is copyrighted with all rights reserved.
Page 5 For more information visit www.pasco.com/legal. Product End of Life Disposal Instructions: This electronic product is subject to disposal and recycling regulations that vary by country and region.