Polygroup GD6000CYKD00 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
WREATH ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new wreath from
Carefully follow the instructions below on how to quickly and easily set up your new wreath.
PACKAGE CONTENTS
Description
Part
1
Section 1
2
Section 2
3
Section 3
4
Section 4
5
Eye bolt (preassembled with wreath)
*Electrical Rating For The Wreath
(For Indoor and Outdoor Use)
Input: 120V, 60Hz, 0.25A
Output: 29V DC 0.45A
1
1
Screw the eye bolts
section
attached through the
hole and tighte.
2
section
1
section
2
section section
2
Screw the eye bolts attached
through the hole and tighten.
Plug
End-connector
1 4
section section
3
2
section section
100 Lights
100 Lights
MODEL #: GD6000CYKD00
1-888-919-0070
OR
Quantity
1
1
1
1
8
Plug
End-connector
Screw the eye bolts
attached through the
hole and tighten.
3
Eye bolt (preassembled
with wreath)
100 Lights
100 Lights
Insert Green
Label Extension
Cord into Adapter
Control box
Adapter
To Be Plugged
Into Wall
Outlet
Polygroup®!
1. Fasten the eye bolts of section 1 to section 2. Fasten
the eye bolts of section 3 to section 2. Fasten the eye
bolts of section 4 to section 3. Fasten the eye bolts of
section 4 to the end-connector of sector 1.
2. Shape and shift branches and tips to fill any gaps
inside wreath.
3. Attach the green label extension cord ensuring both
halves of the wreath get lit.
4. Insert adapter into wall outlet to light up the wreath.
STORAGE INSTRUCTIONS:
1. Remove all ornaments and decorations.
2. Disconnect from power source.
3. Detach all light plugs. Then disassemble wreath sections
from each other by loosening the eye bolts.
4. Store your wreath in a cool, dry place away from sunlight.
Exposure to excessive heat or humidity may damage the
wreath.
1