Advertisement
Quick Links
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
WREATH ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new wreath from
Carefully follow the instructions below on how to quickly and easily set up your new wreath.
PACKAGE CONTENTS
Description
Part
1
Section 1
2
Section 2
3
Eye bolt (preassembled with wreath)
*Electrical Rating For The Wreath
(For Indoor and Outdoor Use)
Input: 120V, 60Hz, 0.16A
Output: 29V DC 0.28A
1
1
section
100 Lights
2
Screw the eye bolts attached
through the hole and tighten.
Plug
End-connector
1
section
section
100 Lights
MODEL #: GD4000CYKD00
1-888-919-0070
OR
Quantity
1
1
4
Plug
End-connector
Eye bolt (preassembled
with wreath)
2
100 Lights
Insert Green
Label Extension
Cord into Adapter
Control box
Adapter
To Be Plugged
Into Wall
Outlet
Polygroup®!
1. Fasten the eye bolts of section 1 to section 2.
2. Fasten the eye bolts of section 2 to section 1. Connect the
plug of the section 2 to the end-connector of sector 1.
3. Shape and shift wreath branches to fill in any gaps. Plug
the adapter from section 2 into a wall outlet.
STORAGE INSTRUCTIONS:
1. Remove all ornaments and decorations.
2. Disconnect from power source.
3. Detach all light plugs. Then disassemble wreath sections
from each other by loosening the eye bolts.
4. Store your wreath in a cool, dry place away from sunlight.
Exposure to excessive heat or humidity may damage the
wreath.
1
Advertisement
Related Manuals for Polygroup GD4000CYKD00
Summary of Contents for Polygroup GD4000CYKD00
- Page 1 4. Store your wreath in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may damage the section section 100 Lights 100 Lights wreath. Insert Green Label Extension Cord into Adapter Control box Adapter To Be Plugged Into Wall Outlet MODEL #: GD4000CYKD00...
- Page 2 TROUBLESHOOTING TIPS If Wreath Does Not Illuminate 1. Please check to make sure that all plugs are properly connected according to the color labels and the adapter is plugged into the wall outlet. Refer to assembly guide for instructions. 2. Please check for loose, broken or missing light bulbs and replace as needed. REMOTE CONTROL INSTRUCTIONS 1.
- Page 3 CAUTION: To reduce the risk of fire and electric shock: a) Use only the power supply that was provided with this product.Using a different adapter will damage the lights and may cause fire, or electrical shock hazards. b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal. c) Do not mount or support strings in a manner that can cut or damage wire insulation.
Need help?
Do you have a question about the GD4000CYKD00 and is the answer not in the manual?
Questions and answers