Dell Latitude LM Supplementary Manual page 3

3. Open the connector door on the back of the com-
puter. Fold over the docking connector panel
inside the connector door (see Figure 2), and then
close the connector door.
docking connector panel
Figure 2. Opening the Docking Connector
Panel
4. Place the computer on the port replicator
platform, with the back of the computer facing
the port replicator's docking connector (see
Figure 3).
Make sure that the grooves on the bottom of the
computer align properly on the platform rails.
replicator
connector
connector door
computer
Figure 3. Positioning the Computer on the
Port Replicator
5. Position your fingers on the platform grips, as
shown in Figure 4, and use your thumbs to push
the computer forward until the docking connec-
tors are fully engaged.
Figure 4. Docking the Computer
Dell Latitude LM Port Replicator
platform rails
3