Top Assembly - Dell Latitude LM Service Manual

E
MI Changes
The following EMI changes may have been made to your computer, and the
sections in Chapter 4 should be updated to reflect these changes.
Keyboard
The heat sink in your computer may be slightly different from the one shown in
Figure 4-25. There may be a conductive sponge added to your computer.

Top Assembly

If you have a Latitude MMX computer, use the following figure for the removal
and replacement procedure. The top assembly has two hard-disk drive contact
springs on the underside of the top assembly. There is also a conductive sponge
added to the top assembly (see the following figure).
keyboard
heat sink
hinge cover (2)
EMI foil
conductive sponge
top assembly
kapton tape
main board
touch pad
connector
bottom
assembly
Top Assembly Removal
SD1
SD2
SD3
SD4
hook
display close
button
(screws SD1 and
SD2 are 5 mm)
5 mm
(screws SD3 and
SD4 are 3 mm)
3 mm
Dell Latitude LM Service Manual Update 7